SmallHD 703 Bolt Wireless Monitor V-Mount Director’s Bundle

$4199

SmallHD 703 Bolt Wireless Monitor V-Mount Director’s Bundle

SKU: SMALL-MON-703BOLT-VM Category:
Description

Description

SmallHD 703 Bolt Wireless Monitor V-Mount Director’s Bundle

7-inch Full HD Monitor with Built-in Wireless HD Receiver

3000nit daylight viewable monitor/receiver that’s compatible with Teradek Bolt 500, 1000, and 3000 transmitters

Streamlined HD Monitoring – No Cables Required

SmallHD and Teradek have joined forces to create a wireless monitoring device that’s easy to see, easy to power and easy hold. Easily pair the 703 Bolt with Teradek Bolt 500, 1000, or 3000 transmitters.

With Teradek wireless technology inside, the 703 Bolt can easily be used as an untethered focusing tool. Its display is tack sharp, and software features like peaking, focus assist, and pixel zoom are easily accessible.

Bring the 703 Bolt to your video village and easily share its built-in wireless feed with another monitor via SDI. Its versatility on set is truly unmatched.

 

Display

Panel Type IPS LCD
Resolution 1920 x 1080
Pixel Density (PPI) 323 ppi
Aspect Ratio 16:9
Active Area 7.02
Brightness 3000
Contrast 1150:1
Color Gamut 70% NTSC
Color Depth 10-bit
Viewing Angle 178 Degrees (CR<10)
Backlight Type White LED

Viewfinder (EVF)

Variable Field of View range

Input Signal Types/Formats

3G-SDI YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50
HD-SDI YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
SD-SDI YCC 4:2:2 @ 10-bits: 480i29.97, 576i25
Audio SDI – Monitor through Headphone Jack – Metering up to 8 channels

Output Signal Types/Formats

3G-SDI YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50
HD-SDI YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
SD-SDI YCC 4:2:2 @ 10-bits: 480i29.97, 576i25
Audio SDI – Incoming Audio Stream is sent downstream via SDI connection

Wireless

SDI Ancillary Data Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to: https://support.teradek.com/hc/en-us/articles/217446087
Color Sampling For SDI: YCbCr 4:2:2, 10-bit
Supported Resolutions 1080p60/59.94/50/30/29.97/25/24/23.98 1080psf30/29.97/25/24/23.98 1080i60/59.94/50 720p60/59.94/50 480i(NTSC)/576i(PAL)
Video Compression Visually lossless
Audio Compression 48KhZ 24-bit PCM
Switches On/Off
Wireless Network 5GHz (20&40Mhz), DFS Frequencies Available
RF Channel Selection Auto only (NOT configurable)
Encryption AES-128
RF Power 15dBm EIRP
Range Up to 300ft line of sight
Noise Rejection Can coexist with WiFi and 5GHz cordless phones

Connector Type

SDI 2x 3g Input, 1x 3g Output
HDMI Not Supported
Component Not Supported
Composite Not Supported
Audio 1x ???” Headphone Jack
Power In 1x Locking LEMO 2-pin Connectors Power Input
USB 1x Proprietary Locking LEMO 5-pin Connectors Power Input

Controls

Primary Control Interface Joystick Navigation, Dedicated Back/Power Button. 5 Additional User Assignable Function Buttons

Data I/O

Storage SD Card for LUTs, Captured Images, Image Overlays, Firmware Upgrades, Profile Saving.
USB USB port supports storage devices for LUTs, Captured Images, Image Overlays, Profile Saving.

Power

Connector Type 1x Locking LEMO 2-pin Connectors Power Input
Voltage With DV Battery Plate: 6.0 – 8.4V 7.2V Nominal With High Voltage Battery Plate: 12 – 34V 14.4V Nominal With Lemo Input: 12 – 34V Max
Power Consumption TBD
Recommended Power Supply Included
Overload Protection Yes

Environmental

Compliance FCC, IC, CE, RoHS
Operating Temperature 0 – 100 degrees F
Storage Temperature -4 – 120 degrees F
Screen Protection AR Coated Gorilla Glass Optical Bonding on Panel
Width 1.21” (3.07cm)
Depth/Length 8.4” (21.34cm)
Weight (Item Only without battery) 32oz (907.18g)
Weight (Packaged) 44.2oz (1253.05g)
Mount Points 1x ¼”-20 Thread on left and right side of Monitor, 7x ¼”-20 Thread on Bottom of Monitor, 7x ¼”-20 Thread on Top of Monitor
Note: 5-inches high without antennas, 9.0 with antennas

Software

Pixel Zoom (type) 2x & 4x Zoom with smooth pan via joystick
Frame Guides Yes: Preset Aspect Ratios & Customizable
DSLR Scale Canon 5DMkii & Canon 7D
Custom Scale Yes (Underscan Only)
Anamorphic De-Squeeze Yes: 1.33x, 1.5x, 1.66x, 2.0x
Image Rotate(Manual/Automatic) Yes – Automatic or Manual Control
Image Flip (Manual/Automatic) Yes – Automatic or Manual Control
Focus Assist (Colors) Yes – User Adjustable Color Style and Intensity
Peaking Yes – User Adjustable Intensity
False Color Yes – Rainbow & Arri Style
Zebra Yes – Dual – User Configurable
Waveform Yes – Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting
Vectorscope Yes
RGB Parade Yes – Fully User Customizable
Histogram Yes – Luma & RGB Style
Image Capture Yes – With Dedicated Button
Custom LUTS Yes – Loadable as Looks on Pages or as Systemwide Color Calibration via the settings menu
LUT Downstream Yes – Available on SDI Out. Applied on Output Preview Page.
LUT Import via SD Card or USB Storage Device
Image Overlay Yes with Opacity Slider and Blink Setting
Audio Meters Yes – up to 8 channel
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “SmallHD 703 Bolt Wireless Monitor V-Mount Director’s Bundle”

Your email address will not be published. Required fields are marked *